A receive-only Raspberry Pi near the field picks up the ATIS broadcast. It’s transcribed automatically and posted to the airport’s page within minutes. Receive only, and about an evening to set up.
Montgomery-Gibbs Executive Airport, AWOS 0411 Z, wind 040 at 04, visibility 10, SKC, temperature 17, dew point 13, altimeter 2992. Montgomery tower, hours of operation are 0600 local until 2100 local. The common traffic advisory frequency is 119.2, pilot operated approach lighting is available on 119.2. For further info contact SOCAL approach on 119.6 or 124.35.
Supplemental. Confirm current ATIS on frequency.
A community-hosted airport: its ATIS, transcribed and published.
Every ATIS your station hears is transcribed automatically and published on your airport’s page.
Credited on your airport’s page as yourself or as your company, as the station’s sponsor. Or stay anonymous.
Pilots flying in and out of the airport can read the ATIS in the app and on the web.
Station hosts get a free ATIS Relay subscription with 300 new dials per UTC month - 3× the usual API usage.
Six parts. Receive only: nothing here transmits. About an evening, start to finish.
A Raspberry Pi in direct sunlight will overheat and throttle itself, and can stop working properly. Mount it in the shade with airflow around it.
A Pi with Wi-Fi, a receiver, and an antenna, plus the card, power, and cables for the board you buy.
We don’t earn a commission on these links.
| Part | Function | Estimate | Link |
|---|---|---|---|
| Raspberry Pi 3 Model A+ | The 3 Model A+ has Wi-Fi and one USB-A port. These computers also operate: Pi Zero W, Pi Zero 2 W, Pi 3B, Pi 3B+, Pi 4, and Pi 5. | $44 | Amazon |
| Raspberry Pi Zero W | The Zero W has Wi-Fi. Use the OTG adapter to connect the receiver. | $40 | Amazon |
| RTL-SDR Blog V3 | The station tunes ATIS with this receiver and rtl_fm. The USB ID is 0bda:2832 or 0bda:2838. | $38 | Amazon |
| Airband antenna | This antenna covers 118–137 MHz. The plug is SMA male. | $90 | Amazon |
| SMA adapter | Use this adapter only if the connectors do not match. | $6–$9 | Search Amazon |
| microSD card, 32 GB | The Pi starts from this microSD card. Use 16 GB minimum. | $21 | Amazon |
| CanaKit 5V 2.5A micro-USB supply | This micro-USB supply gives 5 V at 2.5 A to the 3 Model A+ and the Zero W. | $10 | Amazon |
| micro-USB OTG adapter | Use this adapter on Zero boards only. | $7 | Amazon |
These are estimates, rounded to the nearest dollar. Prices change.
Recommended build (3 Model A+): $203
Zero W build: $206
Tell us your nearest airport and whether your antenna can see it. Apply below and we confirm the frequency with you.
Connect the receiver and antenna to the Pi and follow our setup guide. About an evening.
Power on. The airport’s ATIS is posted to its page and the map within minutes.
Tell us where you fly from. We’ll reply with next steps.
A few other ways to get an airport covered.